Close

Electrostatic Powder Enamel Coating Line

Electrostatic Powder Enamel Coating Line, For this reason, Whirlpool has been a pioneer in the application of enamel dust, and since 2000, it has integrated the enamelling line with 2 changing colored cabins (gray and black) for panellists and furnaces. In 2003, Whirlpool, born of the need to integrate production. With pyrolytic enamel kitchens, decided to build a cabinet equipped for both ovens and enamel finishes; previously replaced color cabins, three color cabins (black, pyrolytic and blue) were installed.

Electrostatic Powder Enamel Coating Line

Electrostatic Powder Enamel Coating Line, In June 2007, a second furnace enamel. Cabinet, equipped with two colors (pyrolytic and gray), was installed. Implementation is performed by n. 3-axis robot that moves 16 guns equipped with special nozzles; A number of fixed pistols guarantee excellent front frame coverage. Electrostatic Powder Enamel Coating Line Robot movements are managed. By a master control panel with PLC and workstation that. Can control different work programs. Whirlpool is working on this line (three-axis robot with one arm) 'on time' with 4 different furnace models. The last 4 cabins installed in the Genga plant are made with enamel dust application.

Strong3000

Electrostatic Powder Enamel Coating Line, Mono-axis robots with extension, moving 8 pistols allowing entry into the boiler; a number of fixed weapons have allowed a very light. Enamel coat to be applied on the exterior surface to prevent. The formation of calcium pyrophosphate. The last 4 cabins installed in the Genga plant are made with enamel dust application. 2 mono-axis robots with extension, moving Electrostatic Powder Enamel Coating Line 8 pistols allowing entry into the boiler. A number of fixed weapons have allowed a very light enamel coat to be. Applied on the exterior surface to prevent the formation of calcium pyrophosphate. Such an application is widely used: in fact. Manufacturers of gratings usually produce gratings with several. Different customers and therefore different designs.

Enamel Furnace

Enamel Furnace, Horizontal application forces the grids to fire at the same position because any deterioration reduces the risk most. The application is carried out using a series of stationary guns. Placed above and below the parts that go into the cabin. In fact, enamel powder coating system with bazaar used; Electrostatic Powder Enamel Coating Line the floor application is affected by wet enamel. Dried (preferably with an infrared oven) and is therefore sent. Directly to the cabinet for white powder application. This cycle was born a few years ago in order to use enamel coated common hair metal. Nowadays, it is preferred to use decarburized sheet metal for large quality problems.